ci: adapt workflow for Forgejo Actions (replace gh-release with API call)

Added arm64 build
Initialize Go module
2026-02-07 17:48:19 +01:00 · 2025-12-15 16:26:57 +01:00 · 2025-09-05 13:49:48 +02:00
4 changed files with 206 additions and 320 deletions
--- a/.github/workflows/build.yml
+++ b/.github/workflows/build.yml
@ -8,199 +8,131 @@ on:

 jobs:
  build:
-    name: Cross-compile for Raspberry Pi
+    name: Build multi-arch Raspberry Pi binaries
    runs-on: ubuntu-latest

    steps:
      - name: Checkout code
-      uses: actions/checkout@v3
+        uses: actions/checkout@v4

      - name: Set up Go
-      uses: actions/setup-go@v4
+        uses: actions/setup-go@v5
        with:
-        go-version: '1.20'
+          go-version: "1.22"

-    - name: Build for ARM (Pi Zero, Pi 1 - ARMv6)
+      - name: Build for ARMv6 (Pi Zero / Pi 1)
        run: |
-        GOOS=linux GOARCH=arm GOARM=6 go build -ldflags="-s -w" -o wol-server-arm6
+          GOOS=linux GOARCH=arm GOARM=6 \
+          go build -ldflags="-s -w" -o wol-server-armv6
+
+      - name: Build for ARM64 (Pi Zero 2 / Pi 3 / Pi 4 / Pi 5)
+        run: |
+          GOOS=linux GOARCH=arm64 \
+          go build -ldflags="-s -w" -o wol-server-arm64

      - name: Create systemd service file
        run: |
-        cat > wol-server.service << 'EOL'
+          cat > wol-server.service << 'EOF'
          [Unit]
          Description=WOL Server Go Application
          After=network.target

          [Service]
-        User=pi
-        WorkingDirectory=/home/pi/wol-server
-        ExecStart=/home/pi/wol-server/wol-server
+          Type=simple
+          User=loke
+          WorkingDirectory=/home/loke/wol-server
+          ExecStart=/home/loke/wol-server/wol-server
          Restart=always
+          RestartSec=3

          [Install]
          WantedBy=multi-user.target
-        EOL
+          EOF

-    - name: Create deployment script
+      - name: Create install script
        run: |
-        cat > install.sh << 'EOL'
+          cat > install.sh << 'EOF'
          #!/bin/bash
          set -e

-        # Installation directory
-        INSTALL_DIR=~/wol-server
+          INSTALL_DIR="$HOME/wol-server"

          echo "Creating installation directory..."
-        mkdir -p $INSTALL_DIR
-        mkdir -p $INSTALL_DIR/templates
+          mkdir -p "$INSTALL_DIR/templates"

-        echo "Installing application..."
-        cp wol-server-arm6 $INSTALL_DIR/wol-server
-        chmod +x $INSTALL_DIR/wol-server
+          ARCH=$(uname -m)
+          case "$ARCH" in
+            armv6l|armv7l)
+              BIN="wol-server-armv6"
+              ;;
+            aarch64)
+              BIN="wol-server-arm64"
+              ;;
+            *)
+              echo "Unsupported architecture: $ARCH"
+              exit 1
+              ;;
+          esac

-        echo "Installing template files..."
-        cp -r templates/* $INSTALL_DIR/templates/
+          echo "Detected architecture: $ARCH"
+          echo "Using binary: $BIN"

-        echo "Installing system service..."
+          cp "$BIN" "$INSTALL_DIR/wol-server"
+          chmod +x "$INSTALL_DIR/wol-server"
+
+          echo "Installing templates..."
+          cp -r templates/* "$INSTALL_DIR/templates/"
+
+          echo "Installing systemd service..."
          sudo cp wol-server.service /etc/systemd/system/
          sudo systemctl daemon-reload
          sudo systemctl enable wol-server

-        # Install required dependencies
          echo "Installing dependencies..."
          sudo apt-get update -qq
          sudo apt-get install -y wakeonlan sshpass

-        # Start the service
          echo "Starting service..."
          sudo systemctl restart wol-server

          echo "==========================================="
-        echo "Installation complete!"
-        echo "The WOL server is now running at http://$(hostname -I | awk '{print $1}'):8080"
+          echo "WOL Server installed successfully!"
+          echo "URL: http://$(hostname -I | awk '{print $1}'):8080"
          echo "==========================================="
-        EOL
+          EOF

          chmod +x install.sh

-    - name: Create README with installation instructions
+      - name: Create release package
        run: |
-        cat > INSTALL.md << 'EOL'
-        # WOL Server Installation Guide
-
-        This guide will help you install the Wake-on-LAN server on your Raspberry Pi.
-
-        ## Prerequisites
-
-        - Raspberry Pi running Raspberry Pi OS (Raspbian)
-        - SSH access to your Pi
-        - SCP or SFTP capability to transfer files
-
-        ## Installation Steps
-
-        ### 1. Transfer Files to Raspberry Pi
-
-        **Option 1: Using SCP from your computer**
-
-        ```bash
-        # Replace with your Pi's IP address
-        PI_IP=192.168.1.100
-
-        # Transfer the installation package
-        scp wol-server.tar.gz pi@$PI_IP:~/
-        ```
-
-        **Option 2: Using SFTP client**
-
-        Use a tool like FileZilla, WinSCP, or Cyberduck to transfer the `wol-server.tar.gz` file to your Raspberry Pi.
-
-        ### 2. SSH into your Raspberry Pi
-
-        ```bash
-        ssh pi@192.168.1.100
-        ```
-
-        ### 3. Extract and Install
-
-        ```bash
-        # Navigate to home directory
-        cd ~
-
-        # Extract the archive
-        tar -xzf wol-server.tar.gz
-
-        # Run the installation script
-        ./install.sh
-        ```
-
-        ### 4. Test the Installation
-
-        Open a web browser and navigate to:
-        ```
-        http://[your-pi-ip]:8080
-        ```
-
-        ## Troubleshooting
-
-        If the service fails to start, check the logs:
-        ```bash
-        sudo systemctl status wol-server
-        ```
-
-        If template errors occur, ensure the template files were copied correctly:
-        ```bash
-        ls -la ~/wol-server/templates/
-        ```
-
-        ## Manual Installation (if needed)
-
-        If you encounter issues with the automated install:
-
-        ```bash
-        # Create directories
-        mkdir -p ~/wol-server/templates
-
-        # Copy files manually
-        cp wol-server-arm6 ~/wol-server/wol-server
-        chmod +x ~/wol-server/wol-server
-        cp templates/* ~/wol-server/templates/
-        sudo cp wol-server.service /etc/systemd/system/
-
-        # Install dependencies
-        sudo apt-get update
-        sudo apt-get install -y wakeonlan sshpass
-
-        # Enable and start service
-        sudo systemctl daemon-reload
-        sudo systemctl enable wol-server
-        sudo systemctl start wol-server
-        ```
-        EOL
-
-    - name: Create all-in-one package
-      run: |
-        # Create a single package with everything needed
          mkdir -p package
-        cp wol-server-arm6 package/
+          cp wol-server-armv6 package/
+          cp wol-server-arm64 package/
          cp wol-server.service package/
          cp install.sh package/
          cp -r templates package/
-        cp INSTALL.md package/

-        # Create the tarball
          tar -czf wol-server.tar.gz -C package .

-    - name: Create Release
-      id: create_release
-      uses: softprops/action-gh-release@v1
+      - name: Create Forgejo Release
        if: github.ref == 'refs/heads/main'
-      with:
-        tag_name: v${{ github.run_number }}
-        name: Release v${{ github.run_number }}
-        draft: false
-        prerelease: false
-        files: |
-          wol-server.tar.gz
-          INSTALL.md
-      env:
-        GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        run: |
+          TAG="v${{ github.run_number }}"
+          API_URL="${{ github.server_url }}/api/v1"
+          REPO="${{ github.repository }}"
+
+          # Create release
+          RELEASE_ID=$(curl -s -X POST \
+            -H "Authorization: token ${{ secrets.GITEA_TOKEN }}" \
+            -H "Content-Type: application/json" \
+            "${API_URL}/repos/${REPO}/releases" \
+            -d "{\"tag_name\": \"${TAG}\", \"name\": \"Release ${TAG}\", \"draft\": false, \"prerelease\": false}" \
+            | grep -o '"id":[0-9]*' | head -1 | cut -d: -f2)
+
+          # Upload asset
+          curl -s -X POST \
+            -H "Authorization: token ${{ secrets.GITEA_TOKEN }}" \
+            "${API_URL}/repos/${REPO}/releases/${RELEASE_ID}/assets?name=wol-server.tar.gz" \
+            -F "attachment=@wol-server.tar.gz" > /dev/null
+
+          echo "Release ${TAG} created with asset wol-server.tar.gz"
--- a/main.go
+++ b/main.go
@ -296,21 +296,19 @@ func verifyScheduleConfig() {
 			return
 		}

-		// Immediately check if we need to boot based on the current time
+		// Immediately check if we need to boot ONLY at exact start time
 		now := time.Now()
 		currentTimeStr := now.Format("15:04")

-		// Check if we're within the schedule window (between start and end time)
-		if currentTimeStr == scheduleConfig.StartTime {
-			log.Printf("STARTUP MATCH: Current time %s matches start time, attempting boot", currentTimeStr)
+		// Check ONLY if current time EXACTLY matches start time
+		if currentTimeStr == scheduleConfig.StartTime && ShouldRunToday(now) {
+			log.Printf("STARTUP MATCH: Current time %s matches start time EXACTLY, attempting boot", currentTimeStr)
 			if !isServerOnline() {
 				sendWakeOnLAN()
-			}
-		} else if currentTimeStr > scheduleConfig.StartTime && currentTimeStr < scheduleConfig.EndTime {
-			log.Printf("STARTUP CHECK: Current time %s is within schedule window, checking server", currentTimeStr)
-			if !isServerOnline() {
-				log.Printf("Server should be online based on schedule - attempting boot")
-				sendWakeOnLAN()
+				// Mark that the server was started by the scheduler
+				scheduleConfig.StartedBySchedule = true
+				scheduleConfig.LastRun = now.Format(time.RFC3339)
+				UpdateScheduleConfig(scheduleConfig)
 			}
 		}

@ -337,28 +335,21 @@ func verifyScheduleConfig() {
 func runScheduleChecker() {
 	// Define the checkScheduleOnce function
 	checkScheduleOnce := func() {
-		// Check if server should be on according to schedule
-		shouldBeOn := CheckSchedule()
+		// Only check exact times for schedule actions, don't use window logic
+		now := time.Now()
+		currentTimeStr := now.Format("15:04")
 		serverIsOn := isServerOnline()

 		// Log schedule status (debug level)
 		if scheduleConfig.Enabled {
-			log.Printf("Schedule check: Window active=%v, Server online=%v", shouldBeOn, serverIsOn)
+			log.Printf("Schedule check: Current=%s, Start=%s, End=%s, LastRun=%s",
+				currentTimeStr, scheduleConfig.StartTime, scheduleConfig.EndTime, scheduleConfig.LastRun)

-			// Force check the current time against the schedule time
-			now := time.Now()
-			currentTimeStr := now.Format("15:04")
-			if currentTimeStr == scheduleConfig.StartTime {
-				log.Printf("EXACT TIME MATCH! Current time %s equals start time", currentTimeStr)
-				shouldBeOn = true
-			} else if currentTimeStr == scheduleConfig.EndTime {
-				log.Printf("EXACT END TIME MATCH! Current time %s equals end time", currentTimeStr)
-				shouldBeOn = false
-			}
-		}
+			// Only act at exact start or end times
+			// EXACT START TIME MATCH - Try to boot server
+			if currentTimeStr == scheduleConfig.StartTime && !serverIsOn && ShouldRunToday(now) {
+				log.Println("EXACT START TIME: Initiating boot sequence...")

-		if shouldBeOn && !serverIsOn {
-			log.Println("Schedule: Server should be on but is offline. BOOT ATTEMPT INITIATED...")
 				// Try multiple times to boot with small delays between attempts
 				for attempt := 1; attempt <= 3; attempt++ {
 					log.Printf("Boot attempt %d/3", attempt)
@ -367,6 +358,10 @@ func runScheduleChecker() {
 						log.Printf("Error booting server from schedule: %v", err)
 					} else {
 						log.Println("Schedule: Boot command sent successfully")
+						// Mark that server was started by scheduler
+						scheduleConfig.StartedBySchedule = true
+						scheduleConfig.LastRun = now.Format(time.RFC3339)
+						UpdateScheduleConfig(scheduleConfig)
 					}

 					// Check if server came online
@ -381,10 +376,11 @@ func runScheduleChecker() {
 						time.Sleep(1 * time.Second)
 					}
 				}
-		} else if !shouldBeOn && serverIsOn {
+				// EXACT END TIME MATCH - Try to shutdown server
+			} else if currentTimeStr == scheduleConfig.EndTime && serverIsOn {
 				// Check if auto-shutdown is enabled
 				if scheduleConfig.AutoShutdown && shutdownPassword != "" && scheduleConfig.StartedBySchedule {
-				log.Println("Schedule: Server is on outside of scheduled window - attempting auto-shutdown")
+					log.Println("EXACT END TIME: Attempting auto-shutdown")

 					// Try multiple times to shut down the server
 					var shutdownSuccessful bool
@ -406,19 +402,21 @@ func runScheduleChecker() {
 					if !shutdownSuccessful {
 						log.Printf("All auto shutdown attempts failed")
 					}
-			} else if !scheduleConfig.StartedBySchedule {
-				// Server wasn't started by scheduler
-				log.Println("Schedule: Server is on outside of scheduled window but was not started by scheduler")
+				}
 			} else {
-				// Just log the situation when auto-shutdown is not enabled
-				log.Println("Schedule: Server is on outside of scheduled window")
+				// No action at non-exact times, just log status
+				if serverIsOn && scheduleConfig.StartedBySchedule && currentTimeStr > scheduleConfig.EndTime {
+					log.Printf("Server is still online after end time %s - waiting for next exact end time match", scheduleConfig.EndTime)
+				}
 			}
 		}

-		// Update last run timestamp if we're exiting the window
+		// Update last run timestamp if we've passed the end time
 		// This helps track when the schedule was last active
 		currentConfig := GetScheduleConfig()
-		if currentConfig.Enabled && !shouldBeOn && currentConfig.LastRun != "" {
+		nowTime := time.Now()
+		currentTimeString := nowTime.Format("15:04")
+		if currentConfig.Enabled && currentTimeString > currentConfig.EndTime && currentConfig.LastRun != "" {
 			lastRun, err := time.Parse(time.RFC3339, currentConfig.LastRun)
 			if err == nil {
 				// If it's been more than a day since the last update, reset the timestamp
--- a/schedule.json
+++ b/schedule.json
@ -1,9 +1,9 @@
 {
-  "enabled": false,
-  "startTime": "",
-  "endTime": "",
+  "enabled": true,
+  "startTime": "13:46",
+  "endTime": "13:49",
  "frequency": "daily",
-  "lastRun": "",
-  "autoShutdown": false,
-  "startedBySchedule": false
+  "lastRun": "2025-09-05T13:46:41+02:00",
+  "autoShutdown": true,
+  "startedBySchedule": true
 }
--- a/utils.go
+++ b/utils.go
@ -10,7 +10,6 @@ import (
 	"os/exec"
 	"path/filepath"
 	"runtime"
-	"strings"
 	"time"
 )

@ -231,7 +230,7 @@ func CheckSchedule() (shouldBeOn bool) {

 	// Check if the schedule should run today based on frequency
 	// Check if we're in the schedule window
-	if !shouldRunToday(now) {
+	if !ShouldRunToday(now) {
 		log.Printf("Schedule is active but not set to run today based on frequency: %s", scheduleConfig.Frequency)
 		return false
 	}
@ -282,7 +281,7 @@ func CheckSchedule() (shouldBeOn bool) {
 		if scheduleConfig.AutoShutdown && shutdownPassword != "" && isServerOnline() {
 			// Only shut down if the server was started by the scheduler
 			if scheduleConfig.StartedBySchedule {
-				log.Printf("Auto shutdown is enabled - attempting to shut down server")
+				log.Printf("Auto shutdown is enabled - attempting to shut down server at end time")

 				// Try up to 3 times to shut down the server
 				var shutdownSuccessful bool
@ -309,8 +308,13 @@ func CheckSchedule() (shouldBeOn bool) {
 			}
 		}
 	} else {
-		// Otherwise check if we're within the window with a small buffer (30 seconds)
-		shouldBeOn = (now.After(startTime.Add(-30*time.Second)) && now.Before(endTime))
+		// ONLY consider the server should be on at EXACT start time or EXACT end time
+		shouldBeOn = (currentTimeStr == scheduleConfig.StartTime)
+
+		// Log that we're waiting for exact times for actions
+		if currentTimeStr != scheduleConfig.StartTime && currentTimeStr != scheduleConfig.EndTime {
+			log.Printf("Not at exact schedule times - no action needed until exact start/end time")
+		}
 	}

 	log.Printf("Schedule window check: Current=%v, Start=%v, End=%v, ShouldBeOn=%v",
@ -321,39 +325,25 @@ func CheckSchedule() (shouldBeOn bool) {
 		log.Printf("EXACT END TIME MATCH! Current time %s equals end time - schedule window should close", currentTimeStr)
 	}

-	// If we're in the schedule window, update the LastRun and attempt to boot the server
-	if shouldBeOn {
-		// Only update LastRun if it hasn't been set yet for this window
-		if scheduleConfig.LastRun == "" {
-			log.Printf("Entering scheduled backup window, updating LastRun timestamp")
+	// If we're at exact start time, update the LastRun timestamp
+	if currentTimeStr == scheduleConfig.StartTime && ShouldRunToday(now) {
+		// We only track that we've seen the start time
+		log.Printf("Exact start time reached - marking schedule run")
+
+		// Don't automatically boot the server here - let the main scheduler handle it
+		// We're just updating state information
 		scheduleConfig.LastRun = now.Format(time.RFC3339)
 		if err := saveScheduleConfig(); err != nil {
 			log.Printf("Warning: Failed to save schedule config: %v", err)
 		}
-
-			// Force a server boot attempt on window start
-			if !isServerOnline() {
-				log.Printf("Schedule window started - attempting to boot server")
-				if err := sendWakeOnLAN(); err != nil {
-					log.Printf("Schedule boot failed: %v", err)
-				} else {
-					// Mark that server was started by scheduler
-					scheduleConfig.StartedBySchedule = true
-					if err := saveScheduleConfig(); err != nil {
-						log.Printf("Failed to save schedule config: %v", err)
-					}
-				}
-			}
-		}
 	}

 	return shouldBeOn
 }

-// shouldRunToday checks if the schedule should run today based on frequency
-func shouldRunToday(now time.Time) bool {
-	// Special case: if we're within the current window (between start and end time),
-	// we should consider the schedule to be active regardless of LastRun
+// ShouldRunToday checks if the schedule should run today based on frequency
+func ShouldRunToday(now time.Time) bool {
+	// We no longer check for windows - we only check at exact times
 	currentTimeStr := now.Format("15:04")
 	today := now.Format("2006-01-02")

@ -366,9 +356,9 @@ func shouldRunToday(now time.Time) bool {
 			endTime = endTime.AddDate(0, 0, 1)
 		}

-		// If we're currently in the window, allow it to run
-		if now.After(startTime) && now.Before(endTime) {
-			log.Println("Currently within today's schedule window - schedule should be active")
+		// Only log that we're at an exact schedule time
+		if currentTimeStr == scheduleConfig.StartTime {
+			log.Println("Currently at exact start time - schedule should be active")
 			return true
 		}
 	}
@ -389,10 +379,11 @@ func shouldRunToday(now time.Time) bool {
 	// Don't allow running multiple times on the same day unless
 	// it's been reset explicitly (LastRun set to empty)
 	if lastRun.Year() == now.Year() && lastRun.YearDay() == now.YearDay() {
-		// Check if we've passed the end time today - if so, we can reset for tomorrow
+		// Check if we've passed the end time today - if so, we can reset for next run
 		if scheduleConfig.EndTime != "" && currentTimeStr > scheduleConfig.EndTime {
 			log.Println("Current time is after end time - resetting for next run")
 			scheduleConfig.LastRun = ""
+			scheduleConfig.StartedBySchedule = false // Reset this flag too
 			saveScheduleConfig()
 			return false
 		}
@ -554,18 +545,6 @@ func shutdownServer(password string) error {
 		log.Println("Using sshpass for authentication")
 		log.Printf("Password being used: %s", password)

-		// Create the command
-		cmdArgs := []string{
-			"sshpass", "-p", password, "ssh",
-			"-o", "StrictHostKeyChecking=no",
-			"-o", "UserKnownHostsFile=/dev/null",
-			"-o", "LogLevel=ERROR",
-			"-o", "ConnectTimeout=10",
-			fmt.Sprintf("%s@%s", serverUser, serverName),
-			"sudo", "-S", "shutdown", "-h", "now",
-		}
-		log.Printf("Full command: %s", strings.Join(cmdArgs, " "))
-
 		// Add more SSH options to handle potential issues
 		cmd := exec.Command("sshpass", "-p", password, "ssh",
 			"-o", "StrictHostKeyChecking=no",
@ -593,18 +572,6 @@ func shutdownServer(password string) error {
 	log.Println("Trying direct SSH with password via stdin")
 	log.Printf("Password being used: %s", password)

-	// Create command args
-	cmdArgs := []string{
-		"ssh",
-		"-o", "StrictHostKeyChecking=no",
-		"-o", "UserKnownHostsFile=/dev/null",
-		"-o", "LogLevel=ERROR",
-		"-o", "ConnectTimeout=10",
-		fmt.Sprintf("%s@%s", serverUser, serverName),
-		"sudo", "-S", "shutdown", "-h", "now",
-	}
-	log.Printf("Full command: %s", strings.Join(cmdArgs, " "))
-
 	cmd := exec.Command("ssh",
 		"-o", "StrictHostKeyChecking=no",
 		"-o", "UserKnownHostsFile=/dev/null",
@ -629,17 +596,6 @@ func shutdownServer(password string) error {
 	log.Println("Trying simpler shutdown command as fallback")
 	log.Printf("Password being used: %s", password)

-	// Create command args
-	cmdArgs = []string{
-		"ssh",
-		"-o", "StrictHostKeyChecking=no",
-		"-o", "UserKnownHostsFile=/dev/null",
-		"-o", "LogLevel=ERROR",
-		fmt.Sprintf("%s@%s", serverUser, serverName),
-		"sudo", "shutdown", "now",
-	}
-	log.Printf("Full command: %s", strings.Join(cmdArgs, " "))
-
 	cmd = exec.Command("ssh",
 		"-o", "StrictHostKeyChecking=no",
 		"-o", "UserKnownHostsFile=/dev/null",
Author	SHA1	Message	Date
Lorenzo Iovino	79864ace88	ci: adapt workflow for Forgejo Actions (replace gh-release with API call) All checks were successful Build and Release / Build multi-arch Raspberry Pi binaries (push) Successful in 10m14s Details	2026-02-07 17:48:19 +01:00
Lorenzo Iovino	a2140b5ea8	Added arm64 build	2025-12-15 16:26:57 +01:00
Lorenzo Iovino	fa9fe6095b	Initialize Go module	2025-09-05 13:49:48 +02:00